This Thermapen is pretty nice - you can swap out the probes so that you can use the right tool for the job without having to have a full second (or third or...) unit. Not the cheapest piece of equipment, but very handy and fast.
Thermapen with Socket for Interchangeable probes
- Available with 1° or 0.1° resolution
- -50 to 1472°F (-50 to 850°C)
- Quick reading with large LCD display
- Rotate tip to turn on and off
- Reads Type K thermocouple probes
Check out our new Thermapen 3 and 7 with interchangeable type K thermocouple probes for complete versatility. Connect our new plastic airline safe probe, a penetration meat probe, or a surface grill probe all with a single Thermapen for fast response and accurate performance. If we don’t have a standard probe to fit your application we’ll make one that does.
With one-handed use, there’s no worry about dangling probe wires or finding a place to set your meter while you position the probe. For the cost of those typical replacement probes, you can buy a new Thermapen and tell your boss how much money you saved.
Thermapen 3:-50°F to 1472°F (-50°C to 850°C)
Thermapen 7:-49.9°F to 199.9°F (-49.9°C to 199.9°C)
Thermapen 3: 1° C or F
Thermapen 7: 0.1° C or F
Thermapen 3: ±1% ±1 digit
Thermapen 7: ±0.7°F (0.4°C) ±1 digit
12 volt MN21 - 100 hours
Type K Thermocouple (not included)
0.5" (12.7mm) LCD
0.75" x 1.85" x 6" (19 x 47 x 153mm)
3.1oz (87 grams)
SEE MORE DETAILS: ThermoWorks – Plug Mount Thermapen.